iCon Pro Audio Hyper Drive
Inline Mic Preamp
Item number:10011832
EAN/UPC:
4897022375485
The iCON Pro Audio HyperDrive inline preamplifier is the perfect way to increase the gain of your dynamic or ribbon microphones without the coloration of a pre-amp. The gain is switchable between 23dB or 46dB.
Take a standard dynamic microphone, add the HyperDrive and benefit from Class A discrete gain, resulting in a sound on a par to a world class condenser microphone perfect for vocals and instruments. Recording acoustic or classical guitar, for example, becomes a breeze – no more cranking up the volume on your pre-amp and without the need for capacitors or resistors in the gain staging pathway. You will hear the sound of the microphone, not your pre-amp! The HyperDrive will improve the quality and noise floor of your recordings and reduce the likelihood of buzz, interference and feedback in live performances.
FEATURES
• Sleek black metal design
• Robust construction – perfect for live use
• Switchable power amplification – Gain:1X 23dB or 2X 46dB
• Extremely low noise floor
• Perfect for live, studio or broadcast uses
• Long cable runs more possible in live situations – less likelihood of interference, buzz and hum
• Prevents signal degradation
Note: requires phantom power for operation and does not work with microphones that require phantom power, i.e. condenser microphones or some active ribbon microphones.
Take a standard dynamic microphone, add the HyperDrive and benefit from Class A discrete gain, resulting in a sound on a par to a world class condenser microphone perfect for vocals and instruments. Recording acoustic or classical guitar, for example, becomes a breeze – no more cranking up the volume on your pre-amp and without the need for capacitors or resistors in the gain staging pathway. You will hear the sound of the microphone, not your pre-amp! The HyperDrive will improve the quality and noise floor of your recordings and reduce the likelihood of buzz, interference and feedback in live performances.
FEATURES
• Sleek black metal design
• Robust construction – perfect for live use
• Switchable power amplification – Gain:1X 23dB or 2X 46dB
• Extremely low noise floor
• Perfect for live, studio or broadcast uses
• Long cable runs more possible in live situations – less likelihood of interference, buzz and hum
• Prevents signal degradation
Note: requires phantom power for operation and does not work with microphones that require phantom power, i.e. condenser microphones or some active ribbon microphones.
| Frequency Range | 10Hz - 120kHz |
| Output noise level | 0.9uV (1X), 1.8mV (2X) |
| Gain | 23dB (1X), 46dB (2X) / @1K Ohms |
| Power | 48V phantom power |
| Recommended load impedance | > 1kOhms |
| Current consumption | 3.0 mA |
| Connectivity | 3-pin male/female XLR connector |
